Page 1 of 1
UV light in canister filters
Posted: Mon Jun 16, 2025 7:22 am
by daisyflow
I've been thinking about adding a UV light to my canister filter setup. Anyone got experience with this? My tank's a 55 gallon with a Fluval 407, stocked with a mix of tetras and corys. Not sure if it's worth the hassle or if it'll mess with my bio load.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 7:41 am
by tidecatcher
UV sterilizers can be a game changer if you're dealing with algae or pathogens. I've run one on my 75 gallon for years, hooked up to an Eheim 600. Just make sure you're not killing off beneficial bacteria. Flow rate matters too, gotta keep it slow for max exposure time.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 7:47 am
by technofuse
What's your current flow rate on the 407? UV units usually need a slower flow to work right. I tried one on my Rena Filstar but had to dial it back to like 150 gph. Also, keep an eye on bulb life, they lose effectiveness after 6–8 months.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 8:27 am
by daisyflow
Thanks for the tips! My flow's around 200 gph now, so I might need to tweak it. Didn't realize the bulbs faded that fast though, that's good to know.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 8:57 am
by corolla
tidecatcher wrote: ↑Mon Jun 16, 2025 7:41 am
UV sterilizers can be a game changer if you're dealing with algae or pathogens. I've run one on my 75 gallon for years, hooked up to an Eheim 600. Just make sure you're not killing off beneficial bacteria. Flow rate matters too, gotta keep it slow for max exposure time.
Yep, totally agree. I run mine at 120 gph on a SunSun canister, keeps my water crystal clear. Just remember to bypass it during med treatments, UV nukes meds too.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 9:32 am
by royalk
I've heard mixed things about UV. Some say it's overkill for a community tank unless you've got persistent issues. My 40 breeder does fine without one, just weekly water changes and a sponge filter. Maybe try improving other stuff first?
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 10:23 am
by onetask
If you go the UV route, get one with a wiper. Cleaning algae off the sleeve is a pain otherwise. Learned that the hard way with my Jebao setup. Also, position it after mechanical filtration so debris doesn't block the light.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 10:46 am
by tidecatcher
royalk wrote: ↑Mon Jun 16, 2025 9:32 am
I've heard mixed things about UV. Some say it's overkill for a community tank unless you've got persistent issues. My 40 breeder does fine without one, just weekly water changes and a sponge filter. Maybe try improving other stuff first?
Fair point, but UV's not just for fixing problems. It's great for prevention too, especially if you're adding new fish often. Cuts down on ich outbreaks big time.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 11:17 am
by corolla
Anyone tried those in-line UV units? Thinking of swapping my submersible for one, but not sure if it's worth the plumbing hassle. My tank's in a tight spot behind the couch, so space is kinda sketchy.
Re: UV light in canister filters
Posted: Mon Jun 16, 2025 11:37 am
by technofuse
Inline's cleaner but pricier. I'd only go that route if you're setting up a new canister. Retrofit kits exist, but they're finicky with hose diameters. What's your canister's output size? My Fluval 306 needed adapters for a 3/4 inch UV unit.